Your TV’s giving problems and you need a TY LA1000 Lamp?

At tyla1000lamp.com, we provide useful information on TY LA1000 lamp.

This Panasonic replacement lamp TY LA1000 is for Panasonic projection televisions. People sometimes also refer to it as TYLA-1000,  TY-LA1000 lamp, Panasonic TY LA1000 replacement lamp, TYLA1000 lamp, TYLA 1000 and TY LA1000. The expected life of the TY LA1000 lamps is 5,000 hours.

The following models are compatible with this television lamp unit:

PT43LC14, PT43LCX64, PT44LCX65, PT50LC13, PT50LC14, PT50LCX63, PT50LCX64, PT52LCX65, PT60LC13, PT60LC14, PT60LCX63, PT60LCX64, PT61LCX65

You can buy just the Panasonic lamp replacement unit TY-LA1000 alone or buy it with the enclosure. Or you can buy it with the enclosure housing.

Be careful when buying the only the lamp or bulb to ensure that you are purchasing an original one. When purchasing with the housing, make sure that you are ordering a TY-LA1000 lamp with housing. There are times, when the pictures will show the housing but it is actually not included.

Also, take note that if you get only the lamp, you need to be a little technically inclined to fix it up. You also will need an extra long screw driver.

It is best to get the complete unit so that you do not have to go through the hassle. Follow carefully the Panasonic TY LA1000 instructions for lamp replacement for TY-LA1000 when doing the replacement. Wait for more than one hour for the lamp to cool before replacing the lamp as the lamp unit will be hot immediately after use and could cause burns.  After lamp replacement you must reset the lamp.

Do the Panasonic TY LA1000 lamp reset when the lamp has been replaced. Or as people call it – the Panasonic lamp reset.

Before doing the television lamp replacement reset, make sure that the power cord is plugged into a properly grounded wall outlet. After this, press the POWER button that is on the projection display or on the remote control to turn on the unit.

Press the VOL- button which is on the the projection display, and hold down the SPLIT or PIP button on the remote control at same time for more than 5 seconds.

The lamp indicator will go out when the lamp time reset is finished.

Panasonic TY LA1000 Lamp Replacement Video Guide

Buying TY LA1000 Lamp

The Panasonic TY LA 1000 television lamp historically has had issues with it not lasting as long as it should. There are a number of forum discussions on this matter and one of them is forum.ecoustics.com which included replacements. The discussion thread is Panasonic LCD Television lamp (TY-LA1000) life issue petition. The last post was in April 2008.

Found another site www.hdtvoice.com, where it looks a lot more hopeful with people who seem to be happy with what they are getting from the lamp.

Considering that the TY LA1000 bulb is widely marketed, and if you have one of the television models that uses it, you may still need to purchase it. Make sure you read reviews for the product bought from different vendors to check their customer feedback and also the kind of support that is given.

The TY LA1000 has a High Intensity Discharge (HID) lamp which contains a small amount of mercury. Dispose of it appropriately in line with environmental considerations. You can find information that will be useful for Panasonic TY-LA 1000 lamp recycling or disposal at Electronics Industries Alliance.

So, if you find that the light is dimming on your Panasonic television set, remember that it is not necessary to get your television replaced. All you need to do is get a new Panasonic replacement lamp. This is a much more cost effective approach.

You can easily fix this TY LA1000 lamp on your own and save money. There are manufacturer authenticated TV replacement lamps that are affordable, and you can extend the usage of your television for a few more years.

These TV replacement lamps can easily be bought through online stores. Make sure you check on the product warranty and return policies, just in case you get a TY LA1000 lamp that has problems.